JVC BR-HD50 - Manual (Page 80)

E-76
MENU SCREENS
Description of the Menu screens (continued)
The TC/UB/CLOCK Menu consists of the following two screens. (1/2 and 2/2)
„ TC/UB/CLOCK [1/2] Menu screen
TC/UB/CLOCK Menu screens
Item Setting Description
TCG SELECT
(0500) PRESET (00)
EREGEN (01)
For selecting the time code generator mode.
PRESET
: PRESET mode
REGEN : REGENERATION mode
NDF/DF [60]
(0501) NON DROP (00)
EDROP (01)
For selecting the framing mode of the time code generator.
(Only for U model)
* Select here in the PRESET mode.
NON DROP : NON-DROP mode
DROP
: DROP-FRAME mode
DF BIT [50]
(0502) EOFF (00)
ON (01)
For selecting whether to record drop-frame bits. (Only for E
model)
(In DV format mode only)
OFF : No recording
ON
: Recording
TC DUPLI.
(0503) EOFF (00)
AUTO (01)
NON DROP (02)
For selecting the type of time code recorded when an IEEE1394
HDV/DV signal is input.
OFF
: Time code recording is controlled by “TCG
SELECT” menu setting.
AUTO : The time code inputted to the IEEE1394 terminal is
automatically duplicated. The framing mode of the
recorded time code will be the same as the framing
mode of the inputted time code.
NON DROP (In DV Format only):
Records the time code input to the IEEE1394 ter-
minal. The framing mode of the recorded time code
is fixed to non-drop frame mode. (Only for U
model)
Use this setting for dubbing tapes recorded with
BR-DV600, GY-DV500 or GY-DV550 in the NON-
DROP FRAME mode. (Only for U model)
TC OFFSET
(0504) EOFF (00)
+1F (01)
+2F (02)
–2F (03)
–1F (04)
For setting up the timing when time code data from the REMOTE
terminal of BR-HD50 to the editing remote controller are output.
OFF : Normal setting
+1F : Outputs time code data +1 frame.
+2F : Outputs time code data +2 frames.
–2F
: Outputs time code data -2 frames.
–1F : Outputs time code data –1 frame.
NEXT BACK For displaying the TC/UB/CLOCK [2/2] Menu screen.
PAGE BACK For returning to the TOP Menu screen.