JVC BR-HD50 - Manual (Page 30)

E-26
CONNECTION
Connecting video signals
„ Input signal
The input video signal is selected with the
INPUT SELECT switch on the front panel.
z To input analog video signals
Use the LINE IN terminal or Y/C IN terminal.
• LINE IN terminal:
Inputs composite video signals.
Connect a BNC cable.
• Y/C IN terminal:
Inputs Y/C separate video signals. Connect
an S video cable (4PIN).
When a wide screen ID signal is input, the
ID signal is recorded.
z To connect digital signals
Connect HDV signals or DV signals to the
IEEE1394 terminal.
Connect an IEEE1394 (6PIN) cable.
HDV signals using 720p format can be input.
HDV 720p format:
720/60p, 720/30p, 720/24p, 480/60p
720/50p, 720/25p, 576/50p
• The IEEE1394 switch located on the front
panel needs to be set, according to whether
the video format is HDV or DV.
• Digital audio is also input from the
IEEE1394 terminal.
• Power is not supplied via the IEEE1394 ter-
minal.
Y/C
IEEE1394
HDMI OUT
Y/C
COMPONENT
OUT
Video output, e.g., VCR/Camera
Digital input
HDV/DV
Analog input
Composite HD/SD Digital
HD monitor
HD/SD Analog
Digital output
HDV/DV
Video input, e.g., VCR
Monitor
Composite
Analog output
Turn off the power before making connec-
tions.
• Attach the supplied filter to the IEEE1394
cable. ( XPage 29)
• For more information on the IEEE1394 termi-
nal, refer to page 18.