JVC BR-HD50 - Manual (Page 67)

E-63
EDIT
Using a non-linear editing system
Tape contents of BR-HD50 are captured by a non-linear editing system and the non-linear edited con-
tents are recorded on BR-HD50.
„ Set the REMOTE/LOCAL switch on the
front panel to REMOTE.
„ REMOTE [1/2] Menu screen
• Set REMOTE SEL 9-PIN to “ON”.
„ REMOTE [2/2] Menu screen
z REMOTE FF/REW MODE:
Use this item to select the operation to be per-
formed if the FF or REW command is received
during playback. (FF/REW or Search)
If the search operation is not performed prop-
erly, set it to “SEARCH”.
z CONTROLLER TYPE (in the REMOTE [2/2]
Menu screen):
Set this item to “TYPE1”.
„ Set the INPUT SELECT switch located
on the front panel to HDV/DV.
„ Set the IEEE1394 switch located on
the front panel to match the video for-
mat.
• Set to DV position for DV mode, and to
HDV position for HDV mode.
„ Set the REMOTE/LOCAL switch on the
front panel to the position matching
the REMOTE menu below.
„ REMOTE [1/2] Menu screen
• Set REM SEL HDV/DV to ON or LOC+REM.
Set this item to ON if it is to become
enabled only when the REMOTE/LOCAL
switch on the front panel is set to REMOTE.
Set this item to LOC+REM if it is to become
enabled regardless of the position of the
REMOTE/LOCAL switch.
Memo
z If the time code of BR-HD50 is not displayed correctly when the non-linear side moves one frame
forward or backward, set the STL/F.ADV: DV in the SYSTEM [1/2] Menu screen to “FRAME.” (In DV
mode only)
z When controlling with RS-422A using the HDV format, only the capture operation is supported.
Connection
Analog video
IEEE1394 terminal
VIDEO OUT
AUDIO OUT
RS-422A
REMOTE
Analog audio
Non-linear system
IEEE1394 (image, audio, control)
Control with RS-422A
(Analog signals)
Setting
Control with the IEEE1394 ter-
minal (Digital signals)
Setting