On-screen display – JVC BR-HD50 User Manual
Page 24
E-20
ON-SCREEN DISPLAY
On-screen display
Besides E-E images and playback images, the monitor connected to the VIDEO OUTPUT terminals
(VIDEO LINE OUT, Y/C OUT, COMPONENT OUT and HDMI OUT) provides the following on-screen
information.
On-screen display
Description
Operation
Status display
Displays the setting status of the VCR
operation mode, date/time, counter.
Settings can be performed with DIS-
PLAY in the DISPLAY Menu screen.
ON : Always display. According to
each event or error, the event
and alarm displays are
shown for about 3 seconds.
AUTO: It displays for about 4 sec-
onds during mode changes.
OFF : No on-screen display. The
alarm display is shown
according to errors, which
occurred.
Event display
Displays the operating status of blank
search, index recording/search.
Alarm display
Displays error/alarm messages for
incorrect operation or improper condi-
tion of BR-HD50.
Warning display
When an error occurred with the VCR,
it displays warnings with the relevant
error codes. (
It is displayed automatically when an
error with the VCR occurred.
Menu display
Displays the menu setting screen.
(
When BR-HD50 enters the STOP/
STILL mode or no cassette tape is
loaded, the menu is displayed when
the MENU button is pressed.
Multi Cue-up screen Displays the Multi Cue-up screen for
registering or selecting cue-up
(searching) point. (
When BR-HD50 enters the STOP,
STILL or PLAY mode, press the Cue-
up button to display the Multi Cue-up
screen.
VIDEO OUTPUT
Monitor