JVC BR-HD50 - Manual (Page 57)

E-53
„ Set “ Q, S” KEY FUNC in the SYSTEM [1/2] Menu
screen to VAR/RECV.
1.
Set BR-HD50 to the PLAYBACK or the STILL mode.
2.
Press the FF button to start fast-forward playback.
Press the REW button to start reverse playback.
„ Press the SEARCH+/ S button to increase the
search speed. Every time you press this button, the
speed increases more.
„ Press the SEARCH–/ Q button to decrease the
search speed. Every time you press this button, the
speed decreases more.
• Cannot perform slow playback when playing back an HDV
tape.
Slow playback and Search mode
Setting
Operation
Search speed
SEARCH+/ S button (Fast) (Slow)  SEARCH–/ Q button
„ DV recorded tape playback
Ч–20··Ч–9 (U)/ –10(E)··Ч–5··Ч–2··Ч–1··Ч–0.5··Ч–0.33··
Ч–0.2··Ч–0.1··STILL··Ч0.1··Ч0.2··Ч0.33··Ч0.5··Ч1(PLAY)··
Ч2··Ч5··Ч9 (U)/10 (E)··×20
(U): U model
(E): E model
* The maximum speed in the DVCAM mode is 15×.
„ HDV recorded tape playback
Ч–16··Ч–6.5··Ч–4.5··Ч–2.5··Ч–1.5··STILL··×1(PLAY)··
Ч2.5··Ч5.5··Ч8.5··Ч18
REW button
SEARCH–/ Q button SEARCH+/ S button
FF button
Memo
z Whether to enable/disable
audio out in the Slow play-
back or SEARCH mode can
be selected with A. OUT AT
SRH: DV in the AUDIO
Menu screen.
z Search audio is not output
for HDV format.
z Playback at ± 0.1 × speed is
step-slow playback (continu-
ous frame-advance play-
back/frame-reverse
playback).
z In step-slow playback, video
is output according to the
STL/F.ADV: DV setting in
the SYSTEM [1/2] Menu
screen. (DV format only)
z When step-slow playback is
continued, the speed is
automatically set to ±0.2×.
z During slow-playback or
frame-advance, noise is
generated to the output
images from the IEEE1394
terminal. For recording slow-
playback images, use ana-
log output signals of BR-
HD50.