JVC BR-HD50 User Manual
Page 21
E-17
5
[COMPONENT OUT] Component sig-
nal output terminal (BNC×3)
Output terminal for component video signals
(Y/P
B
/P
R
). Outputs analog HD/SD video. Con-
nect this to an HD-compatible monitor with a
COMPONENT IN terminal.
• The video format to output from this termi-
nal can be selected using OUT FORMAT
[60]/[50] in the VIDEO Menu screen.
(
• It displays the Menu setting screen, Date/
Time setting screen and warning informa-
tion.
• If DISPLAY in the DISPLAY Menu screen is
set to “ON” or “AUTO”, information will be
displayed on-screen, e.g., the operation
mode, date/time and counter. (
6
[CH1 AUDIO IN] terminal (RCA)
Use this terminal to input analog audio signals.
To enable audio input via this terminal, set the
INPUT SELECT switch located on the front
panel to “LINE” or “Y/C”.
Analog signals are recorded on CH1.
7
[CH2 AUDIO IN] terminal (RCA)
Use this terminal to input analog audio signals.
To enable audio input via this terminal, set the
INPUT SELECT switch located on the front
panel to “LINE” or “Y/C”.
Analog signals are recorded on CH2.
8
[CH1/3 AUDIO OUT] terminal (RCA)
Use this terminal to output analog audio sig-
nals.
• In the 48 kHz audio mode, it outputs the
sound of CH1.
• The output audio channel during playback
of tapes recorded in 32 kHz audio mode, or
the EE audio channel during DV signal
input in 32 kHz audio mode, can be
selected using A.OUTPUT: DV in the
AUDIO Menu screen. (
9
[CH2/4 AUDIO OUT] terminal (RCA)
Use this terminal to output analog audio sig-
nals.
• In the 48 kHz audio mode, it outputs the
sound of CH2.
• The output audio channel during playback
of tapes recorded in 32 kHz audio mode, or
the EE audio channel during DV signal
input in 32 kHz audio mode, can be
selected using A.OUTPUT: DV in the
AUDIO Menu screen. (
0
[HDMI OUT] HDMI signal output termi-
nal
Outputs HDMI signals. (HDMI : High Definition
Multimedia Interface)
Outputs digital HD/SD video and digital audio.
This is connected to a monitor with an HDMI
terminal.
• The video format to output from this termi-
nal can be selected using OUT FORMAT
[60]/[50] and MONITOR SELECT in the
VIDEO Menu screen. (
• It displays the Menu setting screen, Date/
Time setting screen and warning informa-
tion.
• If DISPLAY in the DISPLAY Menu screen is
set to “ON” or “AUTO”, information will be
displayed on-screen, e.g., the operation
mode, date/time and counter. (
Memo
z
Video is not displayed when the connected
monitor does not support the video format
selected using OUT FORMAT [60]/[50] in the
VIDEO Menu screen.
If this occurs, set MONITOR SELECT to
HDMI[A].
z
If the monitor has a DVI-D terminal that sup-
ports HDCP, you can watch digital video by
connecting an HDMI
↔DVI-D cable.
z
When the video format of the IEEE1394 input
signal differs from the IEEE1394 switch, or
INPUT SELECT switch is set to HDV/DV and a
signal is not input into the IEEE1394 terminal,
no signal is output from the HDMI OUT termi-
nal. (“no 1394” is displayed on the counter dis-
play.) Similarly, no signal is output from the
HDMI OUT terminal when a blank cassette
tape is played. (“-------” is displayed on the
counter display.)