JVC BR-HD50 - Manual (Page 61)

E-57
1 Press the R or P button to bring the cursor to the
cue-up point to be changed. Press the S button.
The hour digits of the registered time code display blink.
Press the
S button to select the digit to be changed.
2 Press the R or P button again to change the time-
code.
Press the R button to increase the time code data.
Press the P button to decrease the time code data.
3 Press the SET button to register the changed time
code.
If no time code is to be registered, do not press the SET button.
Instead, press the
Q button to make the blinking time code dis-
play disappear.
Press the R or P button to bring the cursor to EXIT. Press the
SET button.
The display of the monitor returns to the normal screen.
1.
Set the COUNTER switch to TC.
2.
Press the CUE UP button when the normal screen is dis-
played.
The Multi Cue-up screen appears on the monitor.
3.
Press the R or P button to bring the cursor to the cue-
up point to be searched.
4.
Press the CUE UP button.
The cue-up operation for the selected point is performed.
Changing cue-up points
Exiting the Multi Cue-up screen
Searching cue-up points
Memo
If the COUNTER switch is set
to CTL or UB while the Multi
Cue-up screen is being dis-
played, the display returns to
the normal screen.
SET button
R button
Q button
P button
S button
R button
P button
CUE UP button
While searching is being per-
formed, the cue-up point to be
searched flashes on the moni-
tor.
Memo
z For cue-up operation, use
tapes with continuous time
codes recorded.
z If the COUNTER switch is
set to CTL or UB while the
Multi Cue-up screen is being
displayed, the COUNTER
mode does not change.
– – – M U L T I C U E U P – – – – – –
C U E I 0 0 : 0 1 : 3 5 : 1 1
C U E 2 0 3 : 4 2 : 5 9 : 2 1
C U E 3 – – : – – : – – : – –
C U E 4 1 1 : 2 1 : 4 8 : 0 7
C U E 5 – – : – – : – – : – –
E X I T
“ S E T ” : E N T R Y C U E D A T A
“ R E S E T ” : C L E A R C U E D A T A
“ C U E U P ” : E X E C U T E C U E U P
– – – M U L T I C U E U P – – – – – –
C U E I 0 0 : 0 1 : 3 5 : 1 1
C U E 2 0 3 : 4 2 : 5 9 : 2 1
C U E 3 – – : – – : – – : – –
C U E 4 1 1 : 2 1 : 4 8 : 0 7
C U E 5 – – : – – : – – : – –
E X I T
“ S E T ” : E N T R Y C U E D A T A
“ R E S E T ” : C L E A R C U E D A T A
“ C U E U P ” : E X E C U T E C U E U P
Cue-up point
Multi Cue-up screen During cue-up operation