JVC BR-HD50 - Manual (Page 39)

E-35
PREPARATION
Turning on/off the power
Note
After the OPERATE button is pressed and BR-
HD50 is turned on, if the green indicator blinks or
the monitor displays “UNPLUG MAIN POWER,
PLUG BACK IN AFTER A WHILE”, unplug the
power cord from the power outlet, leave it for a
while before turning on the power again.
„ Press the OPERATE button when BR-
HD50 is in the OPERATE OFF mode
(with the OPERATE indicator lit up in
red)
• The power is turned on and the OPERATE
indicator lights up in green. BR-HD50 is
ready for operation. (OPERATE ON mode)
Memo
z In the OPERATE OFF mode, if a cassette tape
is inserted, the power is turned on and BR-
HD50 goes into the OPERATE ON mode.
z Whether BR-HD50 goes into the OPERATE
ON or OFF mode when the power is supplied
to the DC IN terminal can be selected with DC
IN MODE in the SYSTEM [2/2] Menu screen.
„ Turn off BR-HD50
1.
Press the OPERATE button.
• BR-HD50 enters the OPERATE OFF mode and the OPERATE indicator lights up in red.
2.
If BR-HD50 is not to be used for a long period of time, unplug the AC adapter.
To unplug the AC adapter, remove the power cord from the power outlet first.
Turning on the power
OPERATE indicator
OPERATE
button
Turning off the power