JVC BR-HD50 - Manual (Page 52)

E-48
RECORDING
Recording with SERIAL REMOTE terminals
Recording can be turned ON/OFF with a serial remote controller or foot switch connected to the serial
remote terminal located at the rear panel of BR-HD50.
The serial remote controller can be connected to the SERIAL
REMOTE terminal located on the rear panel of BR-HD50.
„ To use the SERIAL REMOTE terminal, set REMOTE
SEL SER in the REMOTE [1/2] Menu screen to ON or
LOC+REM. Then, set the REMOTE/LOCAL switch on
the front panel accordingly.
z REMOTE SEL SER
ON
: When the REMOTE/LOCAL switch is set to
REMOTE, operations can be performed via the
SERIAL REMOTE terminal.
LOC+REM : With the REMOTE/LOCAL switch is set either way,
operations can be performed via the SERIAL
REMOTE terminal. With this setting, the buttons
and switches of the unit can be used too.
„ Set FOOT SW in the REMOTE [2/2] Menu screen accord-
ing to how the SERIAL REMOTE terminal is used.
OFF : Set to OFF when the serial remote controller is
used. The footswitch cannot be used.
L EDGE : Recording and recording pause is switched at the
LOW edge of the footswitch signal.
H EDGE : Recording and recording pause is switched at the
HIGH edge of the footswitch signal.
L LEVEL : Recording is performed at the LOW edge and
paused at the HIGH edge of the footswitch signal.
Before using the foot switch, set BR-HD50 to the RECORDING or
RECORDING PAUSE mode using the relevant buttons of the unit.
(Only with L EDGE and H EDGE)
Memo
z The foot switch can only be used to switch between RECORD-
ING ON and OFF.
z The foot switch can be operated regardless of the setting of the
REMOTE/LOCAL switch.
Connection
Setting
Operation
REMOTE/LOCAL switch
SERIAL
REMOTE
• Serial remote controller
• Foot switch
– – – R E MO T E [ 1 / 2 ] – – –
R E MO T E S E L 9 P O N
R E MO T E S E L S E R O N
R E M S E L H D V / D V O N
L O C A L F U N C T I O N S T P + E J T
P R E R O L L 7 S E C
N E X T P A G E
P A G E B A C K
– – – R E M O T E [ 2 / 2 ] – – –
R E M F F / R E W M O D E F F / R E W
R E M S T O P S E L . E E
P B S T A R T D E L A Y 0 F
S Y N C H R O N I Z A T I O N O N
C O N T R O L L E R S E L T Y P E 1
F O O T S W L E D G E
P A G E B A C K
Foot switch
Serial IN
H
400ms L
Memo
z Besides recording, the serial
remote controller can per-
form other functions.
z If the REMOTE SEL SER is set
to ON, unit buttons that can be
operated can be selected from
LOCAL FUNCTION in the
REMOTE [1/2] Menu screen.
REMOTE [1/2] Menu screen
REMOTE [2/2] Menu screen
terminal
Signal
Min