Wire specifications (recommended), Wire specifications, Item – Schneider Electric Lexium 17S Series User Manual
Page 111: Drive model no, Wire size, Notes, Ac mains, Mhds1004n00, Mhds1008n00, Mhds1017n00
![background image](/manuals/143587/111/background.png)
99
Wire Specifications (Recommended)
Wire
Specifications
The following table lists the recommended wire specifications. Use only copper wire
with insulation rated at 75
°
C or greater, unless otherwise specified.
Item
Drive Model No.
Wire Size
Notes
AC mains
MHDS1004N00
MHDS1008N00
MHDS1017N00
MHDS1028N00
1.5 mm
2
(14 AWG)
MHDS1056N00
4.0 mm
2
(12 AWG)
Protective earth
All
4.0 mm
2
(12 AWG)
DC Link
MHDS1004N00
MHDS1008N00
MHDS1017N00
MHDS1028N00
1.5 mm
2
(14 AWG)
Shielded for lengths
greater than 20cm
MHDS1056N00
4.0 mm
2
(12 AWG)
Shielded for lengths
greater than 20cm
Analog signals
All
0.25 mm
2
(22 AWG)
minimum
Twisted pairs,
shielded
Digital I/O and Fault
Relay
All
0.5 mm
2
(20 AWG)
minimum
Brake
All
1.0 mm
2
(18 AWG)
minimum
Shielded
Bias power
All
2.5 mm
2
(14 AWG)
maximum
Optional external
Regen resistor
All
1.5 mm
2
(14 AWG)
High temperature
insulation (155
°
C or
greater)