Schneider Electric Lexium 17S Series - Manual (Page 46)

34
Installation Safety Precautions
CAUTION!
MECHANICAL STRESS
Protect the drive from physical impact during transport and handling. In particular,
do not deform any exterior surfaces; doing so may damage internal components or
alter critical insulation distances.
Failure to observe this precaution can result in injury or equipment damage.
CAUTION!
ELECTRICAL STRESS
At the installation site, ensure the maximum permissible rated voltage at the Mains
and bias input connectors on the drive are not exceeded. (See EN 60204-1,
Section 4.3.1.) Excessive voltages on these terminals can result in destruction of
the Regen circuit and/or the drive’s electronics.
Failure to observe this precaution can result in injury or equipment damage.
CAUTION!
ELECTRICAL CONNECTIONS
Never disconnect the electrical connections to the SERCOS drive while power is
applied.
Failure to observe this precaution can result in injury or equipment damage.
Continued on next page