Signal wiring, continued, Encoder input connection – Schneider Electric Lexium 17S Series User Manual
Page 71
Advertising
![background image](/manuals/143587/71/background.png)
59
Signal Wiring, continued
Encoder Input
Connection
The following diagram shows the encoder input connections between the encoder
and the 17S drive.
Note: The BPH series servo motors can be optionally fitted with a single-turn or
multi-turn sine-cosine encoder, which is used by the 17S drive as the primary
feedback device for operations requiring highly precise positioning or extremely
smooth running. In addition, the thermistor contact in the servo motor is connected
via the encoder cable to the 17S drive.
Continued on next page
Advertising