Schneider Electric Lexium 17S Series - Manual (Page 21)

9
Hazards, Warnings and Guidelines, continued
Additional Safety
Guidelines Read this documentation and adhere to the safety guidelines contained herein
before engaging in any activities involving the drives.
l
Ensure that all wiring is in accordance with the National Electrical Code (NEC)
or its national equivalent (CSA, CENELEC, and so on), as well as in
accordance with all prevailing local codes.
l Exercise extreme caution when using instruments such as oscilloscopes, chart
recorders, or volt–ohm meters with equipment connected to line power.
l
Handle the drives as prescribed herein. Incorrect handling can result in
personal injury or equipment damage.
l
Adhere to the technical information on connection requirements identified on
the nameplate and specified in the documentation.
l The drives may only be operated in a closed switchgear cabinet with
appropriate compensation for ambient conditions (as defined in Appendix A).
Qualified
Personnel Only properly qualified personnel having extensive knowledge in electrical and
drive technologies should install, commission and/or maintain the Lexium 17S
SERCOS drives.