Siemens CP 243-2 - Manual (Page 76)

Command Interface
5-8
SIMATIC NET CP 243-2 AS-i Master
C79000-G8976-C142/02
Table 5-3 , continued
Name Coding Return Parameter
Get_AS-i_Slave_Status
–> described in Section 5.2.15 Slave address Error record of the AS-i
slave 0 F
H
Get_LPS, Get_LAS, Get_LDS, Get_Flags
–> described in Section 5.2.16 LDS, LAS, LPS, flags 3 0
H
Get_Extended_Total_Configuration
–> described in Section 5.2.17 Actual configuration data
actual parameters
LAS, flags 3 9
H
Store_Extended_Total_Configuration
–> described in Section 5.2.18 Total
configuration 3 A
H
Write_Extended_Parameter_List
–> described in Section 5.2.19 Parameter list 3 C
H
Read_Extended_Parameter_Echo_List
–> described in Section 5.2.20 Parameter echo list 3 3
H
Read_Version_ID
–> described in Section 5.2.21 Version string 1 4
H
Read_AS-i_Slave_ID
–> described in Section 5.2.22 Slave address ID code 1 7
H
Read_AS-i_Slave_Extended_ID1
–> described in Section 5.2.23 Slave address Extended ID1 code 3 7
H
Write_AS-i_Slave_Extended_ID1
–> described in Section 5.2.24 Extended ID1 code 3 F
H
Read_AS-i_Slave_Extended_ID2
–> described in Section 5.2.25 Slave address Extended ID2 code 3 8
H
Read_AS-i_Slave_I/O
–> described in Section 5.2.26 Slave address I/O configuration 1 8
H
Read_I/O_Error_List
–> described in Section 5.2.27 LPF 3 E
H
Write_AS-i_Slave_Parameter_String
–> described in Section 5.2.28 Slave address,
parameter string 4 0
H
Read_AS-i_Slave_Parameter_String
–> described in Section 5.2.29
Slave address Parameter string
4 1
H
Read_AS-i_Slave_ID_String
–> described in Section 5.2.30
Slave address ID string
4 2
H
Read_AS-i_Slave_Diagnostic_String
–> described in Section 5.2.31
Slave address Diagnostic string
4 3
H
Read_Data_and_Delta_List
–> described in Section 5.2.32
none Error bits
Input data
Delta list
1 D
H