Connecting a pc to the base station – Siemens Gigaset 75 User Manual
Page 18
14
Connecting a PC to the base station
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Operating Gigaset talk&surf with Windows 98, Win ME
Registering Gigaset M105 Data at Gigaset 3070/3075isdn
Proceed as follows:
1.
Install Gigaset M105 Data
2.
Start the Gigaset M105 Data configuration program via
>
Start > Programs
> Gigaset M100 Data > Gigaset Setup
.
3.
Select the window "
Local adapter
“
, a free registration location is selected.
4.
Check that your Gigaset M105 Data has been set to the type
Portable part
(default).
5.
Set the Gigaset 3070/3075isdn to registration mode (press LED).
6.
Click the
Register
button and enter the PIN of the partner station (default
0000).
7.
Click
OK
. The registration procedure starts and the message "
If the re-
quired base is ready for registration, the local adapter logs on. Check that
the base is ready for registration.
" appears on the screen.
The two devices are automatically synchronised. An entry now appears in
the
Registered adapter
list.
8.
Close the program with
OK
.
9.
Restart your computer.
Once Gigaset M105 Data has been installed, the telephony driver for
your Gigaset 3070/3075isdn has to be updated. You have three op-
tions here:
1.
You have not yet operated your Gigaset 3070/3075isdn on your PC via
the USB cable:
You must follow the instructions in the sections "PC connection via
USB" and "Installing Talk&surf Software" in the PC installation instruc-
tions provided with Gigaset 3070/3075isdn. When asked which port
is to be used for accessing Gigaset 3070/3075isdn, specify the virtual
COM port for Gigaset M105 Data.
2.
You have operated Gigaset 3070/3075isdn on your PC via the USB ca-
ble before:
Install the talk&surf software again. Start the installation procedure for
the talk&surf software and when asked which port is to be used for
accessing Gigaset 3070/3075isdn, specify the virtual COM port for Gi-
gaset M105 Data
*
and continue with the installation.
3.
You have operated your Gigaset 3070/3075 isdn on your PC via the
USB cable before and you are an experienced PC user:
Reset the telephony driver by selecting the following:
> Start > Set-
tings > Control Panel > Telephony
. Select the
Telephony Drivers
tab
here. Then select the
DECT/ISDN TAPI Service Provider
and click on
Configure
. Click on
Port
, then on
Serial
and select the virtual COM
port for Gigaset M105 Data (see footnote on page 15). Confirm twice
with
OK
and then
Close
.