Siemens Gigaset 75 - Manual (Page 30)

26
System settings
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
Entering long-distance codes
In order to display national and international calls correctly and return them
without problems, you must ensure that long-distance codes are set properly.
By default:
● national = 0
● international = 00
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up → Settings → ISDN settings →
Lg.-dist.digits .
Select using [ ˆ ] and [ ' ]: (national or international) .
Select using [ ˆ ] and [OK]: Change number .
Enter the new or changed code and confirm with [ ' ].
Select using [ ˆ ] and [OK]: Save entry .
Restoring the factory setting
You can choose the settings that are to be restored:
● Operational – All MSNs and prefix codes (exchange codes) are deleted. Au-
thorizations are reset to the default settings.
● Reset all – All functions are reset to the default settings (see "Restoring the
factory setting" on page 53). The system PIN is reset to "0000". All entries
(missed calls list, costs) are deleted. Before resetting, you must deactivate
all active call forwarding settings.
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up → Settings → System settings →
Spec. function
→
Default Reset .
Confirm with [OK].
(QWHUWKHV\VWHP3,1DQGFRQILUPZLWK
[OK].
Operational is displayed. Confirm with [OK]. Acknowledge the message
"Settings reset" and wait for the confirmation tone.
or Select using [ ˆ ] Reset all and confirm with [OK].
$QVZHU>YES@WRWKHTXHVWLRQ5HVHWIDFWRU\GHIDXOWV"
&RQILUPWKHPHVVDJH$OOUHVHWDQGZDLWIRUWKHFRQILUPDWLRQWRQH
Querying the status
You can query the status of the following settings:
● Callback
● Anonymous calling and answering
● Call forwarding
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up
→
Status
Press [OK] to open the status list
(
9 before an item = system function active).
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
5.
6.
1.
2.
3.