H2.pb - emergency numbers, H2 - restoring the factory setting, Emergency numbers restoring the factory setting – Siemens Gigaset 75 User Manual
Page 57: Emergency numbers, Restoring the factory setting, Security settings, Configuring new emergency numbers
53
Security settings
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Emergency numbers
Two or three emergency numbers (country-specific) are entered at the base
station. Five additional emergency numbers can be added to the following po-
sitions. The first position in the list is assigned the Siemens Hotline for your Gi-
gaset 3070isdn/3075isdn as standard. This preset can be overwritten.
Configuring new emergency numbers
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
Security
.
Enter the base PIN and confirm with [OK].
Select using [
] and [OK]:
Emergency Nos.
→
<no entry>
.
Confirm [
'
].
Select using [
] and [OK]:
Change number
.
You can also delete or display an emergency number in this supplementary
menu.
Enter the new emergency number (max. 32 digits) and confirm [
'
].
Select using [
] and [OK]:
Save entry
.
You can also add a number from the directory to this supplementary menu as
an emergency number, or use a provider number (if supported).
Dialling an emergency number with active DSS and/or base/telephone
lock
The [EMERG.] softkey is displayed when DSS/telephone lock is active, see your
handset operating instructions.
Press any key or
D
.
Confirm EMERG.
Enter the emergency number.
Restoring the factory setting
You can reset the station to the factory setting. The handsets remain regis-
tered.
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
System settings
→
Spec. function
→
Default Reset
.
Enter the system PIN of the base station (factory setting: 0000) and confirm
with [OK].
Select using [
] and [OK]:
Reset all
.
Confirm prompt with [YES].
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
1.
2.
3.
4.
5.