Siemens Gigaset 75 - Manual (Page 23)

19
The Installation Assistant (Comfort handsets only)
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
The Installation Assistant
(Comfort handsets only)
The Installation Assistant can be called up any time to help you set the most
important functions. The following settings can be completed in sequence:
● Date and time
● Own call number (MSN)
● Device type (e.g. telephone, fax)
● Incoming MSN, internal call allocation to MSN (for possible subscriber num-
bers, see page 27) and outgoing MSN (the telephone number assigned to
external calls)
● Exchange code (with installation behind a PABX)
Starting the Installation Assistant
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up
→
Installation .
Confirm the prompt for starting the Installation Assistant with [YES].
Entering the date and time
Confirm the prompt for entering the time with [YES].
Enter the date in the format " - - . - - . - - " (day, month, year) and the time in the
format " - - : - - " (hour, minute) and confirm with [
9 ].
Select using [ ˆ ] and [OK]: Save entry .
Programming own call numbers (MSNs)
The MSN supplied by your provider can be programmed here. The first time it
is switched on, the base station attempts independently to determine the
MSNs itself. The result is displayed. You can save up to 10 call numbers.
Confirm the prompt for entering the call number with [YES].
Confirm the prompt for entering the first MSN with [YES].
Enter the name and number and with < move to Change call number, Enter
call number and confirm with [ 9 ].
Select using [ ˆ ] and [OK]: Save entry .
1.
2.
3.
1.
2.
3.
1.
2.
3.
4.