Making comfort calls, Toggle, Conference circuit – Siemens Gigaset 75 User Manual
Page 33: Setting up an external enquiry call, Ending an external enquiry call
29
Making comfort calls
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Toggle
With the toggle feature, you can switch between an active and inactive connec-
tion. The active connection is put on hold.
You can switch between called parties with [
] and [
].
Ending an enquiry call/toggle
Press
for the menu.
Select using [
] and [OK]:
End
.
You are reconnected with the subscriber on hold.
Conference circuit
A conference circuit enables you to talk to two parties at the same time. These
can either comprise two external subscribers, or one external and one internal
subscriber.
Setting up three way calling
You are conducting an enquiry call. The first subscriber is put on hold.
Press [CONF.]: a conference circuit is established.
Ending three-way calling
You are conducting three-way calling.
Press [INDIVID]: The conference circuit is terminated.The connection which
was active immediately before three-way calling was set up is reestablished as
the active connection. The other subscriber is put on hold once more.
Setting up an external enquiry call
You would like to contact another external subscriber during an external call. To
enable this feature, see "Conducting a call externally or via a second B-channel"
on page 23:
Press
for the menu.
Select using [
] and [OK]:
Consultation
.
Enter the call number for the second subscriber.
Ending an external enquiry call
You are conducting an enquiry call which you would like to end:
Press
for the menu.
Select using [
] and [OK]:
End
.
Transferring calls on/before answer - ECT (Explicit Call Transfer)
ECT is currently only supported behind PABXs.
To activate/deactivate call transfer, see page 23.
You are conducting an external call which you would like to transfer to another
external subscriber.
Press
for the menu.
Select using [
] and [OK]:
Consultation
.
Enter the call number to which the call is to be transferred.
Replace the handset: press
¯
.
or
Conduct the enquiry call.
Replace the handset: press
¯
.
1.
1.
2.
1.
1.
1.
2.
3.
1.
2.
1.
2.
3.
4.
4.
5.