H1.pb - operation with theentrancetelephone, H2 - configuring the entrance telephone, Operation with the entrance telephone – Siemens Gigaset 75 User Manual
Page 70: Configuring the entrance telephone, Forwarding the entrance telephone externally
66
Operation with the entrance telephone
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Operation with
the entrance telephone
Configuring the entrance telephone
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
Set up user
→
Set up device
.
Select using [
] and [
'
]:
(required internal subscriber 21 or 22)
.
Select using [
] and [OK]:
Device select.
→
Door
*
.
Assigning internal users to the entrance telephone call group
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
Set up user
→
Set up device
.
Select using [
] and [
'
]:
(required internal subscriber)
.
Select using [
] and [OK]: Door call grp..
Forwarding the entrance telephone externally
All entrance telephone calls can be forwarded to an external call number.
Entering/modifying a destination call number for external call forwarding
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
Set up user
→
Set up device
.
Select using [
] and [
'
]:
(required internal subscriber)
.
Select using [
] and [OK]: Forw.entr.tel..
Select using [
'
]:
(destination call number)
.
If a destination call number has not yet been stored, the entry <blank> is dis-
played.
Select using [
] and [OK]: Change number.
Enter the new or modified destination call number and confirm with [
'
].
Select using [
] and [OK]: Save entry.
Deleting a destination call number for external call forwarding
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
Set up user
→
Set up device
.
Select using [
] and [
'
]:
(required internal subscriber)
.
Select using [
] and [OK]: Forw.entr.tel..
Select using [
'
]:
(delete number)
.
Select using [
] and [OK]: Delete number.
1.
2.
3.
4.
*. This configuration is only applicable for entrance telephones in accordance with FTZ
(door opener via ring current). Telephones with DTMF control must be programmed
like normal telephones.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.