Siemens Gigaset 75 - Manual (Page 26)

22
Configuring ISDN call numbers (MSNs)
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
Assigning an outgoing MSN
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up → Settings → Set up user →
Set up device .
Select using [ ˆ ] and [ ' ]: (required internal subscriber) .
Select using [ ˆ ] and [OK]: Send MSN → (required MSN) .
Answering machine (only 3075isdn)
Gigaset 3075isdn includes an answering machine (AM) which can be used for
three call numbers. Up to three MSNs can be assigned to the answering ma-
chine. However, an individual MSN cannot be assigned to more than one an-
swering machine at a time. Only one message can be recorded at a time.
Access options for the answering machine
No MSN configured (default configuration):
– In this case, all connected devices can access the AM. When activated, the
AM takes calls to all MSNs.
One, two or three MSNs have been assigned:
– The relevant AM can only be set and accessed by connected devices with
the same MSN.
– Exception: an answering machine which is the only device in the system to
be assigned to a particular MSN can be operated from all connected devices.
Assigning an incoming MSN to the AM
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up
→
Settings
→
Set up user
→
Set up device .
Select using [ ˆ ] and [ ' ]: ( Int: 91 Intern 91 for AM 1, Int: 92 Intern 92 for AM 2,
Int: 93 Intern 93 for AM 3). If the answering machine has already been config-
ured, the following message is displayed: Int 91: AM 1 CN , etc .)
Select using [ ˆ ] and [OK]: Receive MSN → (relevant MSN) .
Selecting an answering machine
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up → Answ. Machine → (relevant AM) .
The list of answering machines only contains those answering machines as-
signed for this handset. If only one answering machine is configured, the se-
lection list is ignored.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.