Siemens Gigaset 75 - Manual (Page 29)

25
System settings
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
System settings
Configuring music-on-hold
The caller hears music-on-hold when put on hold by the base station rather
than the exchange (e.g. in the case of internal transfer). The following settings
can be selected:
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up → Settings → System settings →
Music on Hold .
Select using [ ˆ ] and [OK]: required type.
This feature is also available when a call is held via 2 B-channels, see section
"Conducting a call externally or via a second B-channel" on page 23.
Audio settings
With this setting you can define a ringer melody for each MSN, valid for all
called handsets. Independent of this setting, you can also select a different
ringer melody for the handset for internal calls.
Assigning a ringer melody to an MSN
Each newly assigned MSN is automatically assigned its own ringer melody.
This setting enables you to change the type of melody.
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up
→
Settings
→
ISDN settings
→
Set up MSN .
Select using [ ˆ ] and [ ' ] : (required MSN) .
Select using [ ˆ ] and [OK] : Ringer Melody .
Select using [ ] or [ ] one melody from 0 to 9 and confirm with [OK].
Configuring an internal ringer melody for a handset
Press  for selection menus.
Select using [ ˆ ] and [OK] : Settings → Audio → Ringer Melody .
Select using [ ] or [ ] one melody – this melody is generated in the handset
self and played back directly – confirm your selection with [OK].
Internal Integrated default melody
Off Music-on-hold via connection 21 or 22. This menu item only ap-
pears if "Ext. music/hold" is selected when the device type is set
to connection 21 or 22.
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
3.