Calling line identification restriction (clir), Making comfort calls, Temporary calling line identification restriction – Siemens Gigaset 75 User Manual
Page 40: Permanent calling line identification restriction
36
Making comfort calls
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Calling line identification restriction (CLIR)
If you withhold your number from other parties, you can activate the calling line
identification restriction. This can be set on a temporary or permanent basis.
Temporary calling line identification restriction
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Call preparat.
→
Temp. withhold
.
(
9
in front of "Withhold No." = ON / no
9
= OFF).
Confirm with [OK] and dial the desired number.
$IWHUWKHFDOOWKLVUHVWULFWLRQLVOLIWHG<RXUQXPEHUZLOOQRWEHZLWKKHOGIURPWKH
QH[WSDUW\FDOOHG7KLVDSSOLHVHYHQLI\RXVHOHFWDQXPEHUIURPWKHUHGLDOOLVW
Permanent calling line identification restriction
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
ISDN settings
(
9
in
front of "Withhold No." = ON / no
9
= OFF).
Confirm with [OK] and dial the desired number.
Automatic call forwarding due to inaccessible handset
This option can only be used if you have activated the CD service for your con-
nection. Further information can be obtained from your network provider.
For instance, if your handset is outside the base station range, the battery has
run out or the handset is switched off, this feature reroutes all calls to a defined
external number.
Prerequisite: You have assigned an exclusive MSN to your handset (see
page 21). This MSN must not be assigned to any other device, even on the
ISDN bus.
Enter a number and activating/deactivating automatic call forwarding
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
ISDN settings
→
Auto
forwarding
.
Press [OK]: a list of all MSNs entered is displayed.
Select using [
] and [OK]
(desired MSN)
and enter an external destination
number.
3UHVV
[
'
] and select
Save entry
followed by [OK]. Automatic call forwarding is
now activated.
(
9
in front of MSN = automatic call forwarding ON, no
9
= automatic call for-
warding OFF).
1.
2.
3.
Info
1.
2.
3.
1.
2.
3.
4.
5.