Siemens Gigaset 75 - Manual (Page 44)

40
System functions
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
Entering an automatic start/end time for night service
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up
→
Night Service
→
(required MSN) → Start time or End time .
Enter start time or end time (4 digits) and confirm with [ ' ].
Select using [ ˆ ] and [OK]: Save entry .
Activating/deactivating all-day night service for Saturday/Sunday
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up → Night Service → (required MSN)
→
Sat/Sun all day .
Activating/deactivating night service
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up → Night Service → (required MSN)
→
Activate or Deactivate
Entrance telephone
See separate section: "Operation with the entrance telephone" on page 66.
Displaying call charge and call duration
Call charge display
You can use call charge display if you have registered with your provider for
"Call charge display during a call".
The units/total charges accumulated and the cost of the last call completed can
(depending on programming) be checked using your comfort handset. The total
cost includes the charges incurred by the handset.
Activating/deactivating call duration display
If this feature is activated, the call duration is displayed for outgoing and incom-
ing calls, for enquiry calls and for three-way calling.
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up
→
Settings
→
System settings
→
Cost/duration .
Enter the base PIN and confirm with [OK].
Select using [ ˆ ] and [OK]: Call display
→
Call Duration .
Activating/deactivating unit/charge display
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up → Settings → System settings →
Cost/duration .
Enter the base PIN and confirm with [OK].
Select using [ ˆ ] and [OK]: Call display
→
Units/Costs .
1.
2.
3.
4.
1.
2.
1.
2.
1.
2.
3.
4.
1.
2.
3.
4.