Siemens Gigaset 75 - Manual (Page 39)

35
Making comfort calls
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
Holding calls
Putting external subscribers on hold
You are conducting an external call.
Press [INT]: The external subscriber is put on hold.
The waiting external subscriber hears music-on-hold. You can conduct an inter-
nal enquiry call.
As soon as the internal subscriber ends the enquiry call, [BACK] appears on the
display for 10 seconds. Pressing [BACK] reconnects you to the external caller.
If this option is not used, the ring tone sounds again after 10 seconds.
or To end the internal call, press  for the menu and select [End] followed by
[OK]. You are then returned to the external call and the internal subscriber hears
the busy tone.
Putting internal subscribers on hold
You are conducting an internal call.
Press [CONSULT]: The internal subscriber is put on hold.
You can set up an external enquiry call.
To end the external call, press  for the menu and select [End] followed by
[OK]. You are then returned to the internal call and the external connection is
closed.
or  To set up a three-party conference, press [CONF.]. This establishes the confer-
ence circuit.
Parking/continuing calls ("unpark")
You are conducting an external call which you would like to transfer to another
telephone at your ISDN connection, for example.
Press  for the menu.
Select using [ ˆ ] and [OK]: Call Park .
Enter a parking number (one or two digits) and confirm with [OK].
Press ¯ .
Unparking a call before answering
Press  for selection menus.
Select using [ ˆ ] and [OK]: Service Set up
→
Call preparat.
→
Cancel CallPark .
Enter the parking number assigned previously and confirm with [OK].
Press D .
Call status is restored.
"Cancel CallPark" after answering a call
Press D .
Press  for the menu.
Select using [ ˆ ] and [OK]: Cancel CallPark .
Enter the parking number assigned previously and confirm with [OK].
1.
2.
2.
1.
2.
2.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.