Sony DFS-700 - Manual (Page 137)

Chapter 6 System Connections and
Settings
Chapter 6 System Connections and Settings
6-9
a) Setup menu item CpnIN set to “IN 1-4”
b) Setup menu item CpnIN set to “IN 5-8”
Output Video Setup (page 4/8)
Primary inputs and signal formats
SDI: serial digital signals
Component: analog component signals
Composite: analog composite signals
Input number 1 2 3 4 5 6 7 8
With standard
equipment SDI (1) SDI (2) SDI (3) SDI (4) Component
(1/5)
Component
(2/6)
Component
(3/7)
Component
(4/8)
RGB (4/8)
With BKDF-701
installed SDI (1)
Component
(1/5)
SDI (2)
Component
(2/6)
SDI (3)
Component
(3/7)
SDI (4)
Component
(4/8)
RGB
SDI (5)
Component
(5)
SDI (6)
Component
(6)
SDI (7)
Component
(7)
SDI (8)
Component
(8)
With BKDF-702/
702P installed
(mode 1)
a)
SDI (1)
Component
(1/5)
SDI (2)
Component
(2/6)
SDI (3)
Component
(3/7)
SDI (4)
Component
(4/8)
RGB
Composite
(5)
YC (5)
Composite
(6)
YC (6)
Composite
(7)
YC (7)
Composite
(8)
YC (8)
With BKDF-702/
702P installed
(mode 2)
b)
SDI (1) SDI (2) SDI (3) SDI (4) Component
(1/5)
Composite
(5)
YC (5)
Component
(2/6)
Composite
(6)
YC (6)
Component
(3/7)
Composite
(7)
YC (7)
Component
(4/8)
RGB(4/8)
Composite
(8)
YC (8)
YC: analog YC signals
RGB: analog RGB signals (G signal with sync)
( ): Figures in parentheses represent input connector
numbers.
Button Setting Meaning Values (First value is factory default.)
F1 CLEAN Select output video from
CLEAN OUT connector. CLEAN/KEYOUT/PVW
(See page 2-15.)
F2 CLIP Toggle white clip and dark clip on/
off.
Only valid for SDI output signals,
and the SDI standard white and
dark values are applied. OFF/ON
F3 T-Area Toggle safe title indication on
preview video using CLEAN OUT
connector on/off.
When on, the safe title indication
shows approximately 85% of the
whole image area.
This item appears when F1(CLEAN)
is set to “PVW”.
OFF/ON
F4 FLD FZ Select the field output when the
internal frame memory is set to field
freeze mode. ODD/EVEN