Sony DFS-700 - Manual (Page 201)

Appendixes
Appendixes
A-63
To Exchange the Button Labels
2 3
After changing a pattern assignment, you can exchange the label on the
numeric buttons.
Proceed as follows.
1
Write the new pattern on one of the supplied exchange labels.
2
Insert the supplied tool into the hole at the side of the button and
remove the button.
3
Insert the tool into the slot on the side of button, lifting up the white
button cap, and remove the cap.
4
Remove the old label and insert the new label.
5
Replace the white button cap.
6
Return the button to its original position.