Sony DFS-700 - Manual (Page 67)

Chapter 3 Basic Operation
Chapter 3 Basic Operation
3-41
4
Watching the composite image on the program monitor, in page 1 of
the chroma key menu, adjust the hue, clip, and gain.
When the background part of the foreground image is not
completely replaced by the background image
Adjust the hue with the F3(Hue) knob and the clip with the F1(Clip)
knob.
When the outline of the foreground image is not clear
Adjust the clip with the F1(Clip) knob and the gain with the F2(Gain)
knob.
In combination with a luminance key
1
Press the PAGE button to display page 3 of the chroma key menu, then
press the F1(LUM) button, setting the parameter to “ON”.
T1CRK
3/3
LUM
ON
Clip
0-100
Gain
0-100
INVERT
OFF
PAGE F1 F2 F3 F4
2
Watching the composite image on the program monitor, use the
F2(Clip) knob to adjust the clip, and the F3(Gain) knob to adjust the
gain. To leave dark portions, press the F4(INVERT) button, setting the
parameter to “ON”.
To switch between the composite image and the background
image
Press the CUT button. This toggles between the composite image and the
background image.
To fill the inserted text or image with a color matte (using a
color matte as key fill)
Use the same procedure as for an auto chroma key (see page 3-39).