Sony DFS-700 - Manual (Page 16)

Chapter 2 Location and Function of
Parts and Controls
2-6
Chapter 2 Location and Function of Parts and Controls
5 PATTERN/KEY PAD buttons
These function as shown in the following table,
according to the selected mode.
Changing labels
You can change the labels on the buttons, using the
supplied labels.
For details of how to change the labels, see page A-63.
Button Mode
DIRECT
PATTERN PATTERN TRANS USER PGM SNAP SHOT DIRECT RECALL
0 to 9 Select the
pattern shown
on the button.
a)
Set the pattern
number. Set the
transition time. – Specify a
snapshot
number. Recall one of
snapshots 0 to 9.
LAST X/INS – – – Add a key
frame. Return to the
state before
recalling a
snapshot.
(Press LAST X
while holding
down the
ENTER button.) Return to the state
before recalling a
snapshot. (Press
LAST X while
holding down the
ENTER button.)
DEL – Delete the last
character
entered. Delete the last
character
entered. Delete a key
frame. Delete the last
character
entered. –
P IN P/RST Select the
pattern shown
on the button.
a)
Reset the input
value. Reset the input
value. Initialize the
parameters. Reset the input
value. –
UP Increment the
pattern number. Increment the
pattern number. Increment the
transition time
by one frame. Increment the
key frame
number. Increment the
snapshot
number. Increment the
snapshot number.
DOWN Decrement the
pattern number. Decrement the
pattern number. Decrement the
transition time
by one frame. Decrement the
key frame
number. Decrement the
snapshot
number. Decrement the
snapshot number.
ENTER – Confirm the
input value. Confirm the
input value. Change the key
frame. Confirm the
input value.
–: Not used
a) For the pattern allocation, see pages 3-18 to 3-20.
5 Fade-to-black and DSK section
FADE
TO
BLACK
DSK
DSK PVW
1 DSK PVW button
2 FADE TO BLACK button
1 DSK PVW (downstream keyer preview) button
When this button is pressed, turning it on, the program
output video is output from the preview output
connectors with the downstream key inserted.
2 FADE TO BLACK button
Press this button, turning it on, to change the entire
program output video to a preset color (factory default:
black). To set the color, press the MATTES button in
the menu control section, and display the setting menu
in the effect control section ((F1) SELECT-FTB).
By pressing the SET button in the effect transition
section, you can set the fade-to-black transition time.
Control Panel
Functions of the PATTERN/KEY PAD buttons
Return to the state
before recalling a
snapshot. (Press
LAST X while
holding down the
ENTER button.)
3 DSK button