Effect control parameter list – Sony DFS-700 User Manual

Page 144

Advertising
background image

Appendixes

A-6

Appendixes

Effect control parameters (continued)

Pattern
No.

Effect type and adjustable parameters

1075
to
1079

Cropping

F1: X-coordinate of center (Pos_X = Left to right)

F2: Y-coordinate of center (Pos_Y = Bottom to top)

F3: Size of pattern (Size = 0 to 100)

F4: Aspect raito of the pattern (Aspect = Taller to wider)

Picture-in-picture (three-dimensional)

F1: X-axis rotation (Rot_X = –70° to +70°)

F2: Y-axis rotation (Rot_Y = –70° to +70°)

F3: Z-axis rotation (Rot_Z = –70° to +70°)

F4: Perspective (Pers = 0 to 100)

Picture-in-picture (skew)

F1: Expansion and reduction along X-axis (Size_X = Small to 3 times)

F2: Expansion and reduction along Y-axis (Size_Y = Small to 3 times)

F3: Degree of distortion along X-axis (Skew_X = Min: No distortion)

(default)

F4: Degree of distortion along Y-axis (Skew_Y = Min: No distortion)

(default)

Spotlight

F1: Spotlight brightness at maximum fader lever position (Shadow = Dark

to bright)

F4: Aspect ratio of the processing area (Aspect = Taller to wider)

1102
1103
1106
to
1109

1104
1105

1150
1151

1210
to
1213

Stream

F1: Stream direction (Dirctn)

Wave modulation

F1: Degree of modification 1 (Amp_X = 0 to 100) (1250: Modification

along X-axis)

F2: Degree of modification 2 (1250: Amp_Y = 0 to 100) (1251/1271:

Angle = 0 to 99)
1250: Modification along Y-axis
1251, 1271: Direction of modification
1252, 1253, 1270: Not used

F3: Wave cycle (Freq = 0 to 100)

F4: Wave speed (Speed = 0 to 100)

1250
to
1253
1270
1271

Effect Control Parameter List

1065

Strobe

F1: Frames displayed per second (Strobe = 0 to 100)

Cinema

F1: Frames displayed per second (Strobe = 0 to 100)

F2: Wide screen degree (Wide = 0 to 100)

F3: Wide screen position (Posi = Bottom to top)

F4: Softness (Soft = 0 to 100)

1120
to
1128

Picture-in-picture

F2: Display position (POS = TOP_L/TOP/TOP_R/LEFT/CENTER/RIGHT/

BTM_L/BOTTOM/BTM_R)

F3: Picture size (Size = 0 to 100)

F4: X-axis picture position (Pos_X = –100 to +100)

F5: Y-axis picture position (Pos_Y = –100 to +100)

1066
1067

(continued)

Advertising
This manual is related to the following products: