Sierra INNOVA-FLO 220 - Manual (Page 61)

Appendix A Specifications Series 220/221 Instruction Manual
A-2 IM-22
Water Minimum and Maximum Flow Rates
½-inch ¾-inch 1-inch 1.5-inch 2-inch 3-inch 4-inch 6-inch 8-inch
gpm 1
22
1.3
40
2.2
67
5.5
166
9.2
276
21
618
36
1076
81
2437
142
4270
m 3 /hr .23
5
.3
9.1
0.5
15
1.3
38
2.1
63
4.7
140
8.1
244
18
554
32
970
Linear Range
Smart electronics corrects for lower flow down to a Reynolds num-
ber of 5,000. The Reynolds number is calculated using the fluid
density and viscosity entered into the memory. Rangeability de-
pends on the fluid, process conditions and pipe size. Consult factory
for your application. Velocity rangeability under ideal conditions is as
follows:
Liquids 30:1 1 foot per second velocity minimum
30 feet per second velocity maximum
Gases 30:1 10 feet per second velocity minimum
300 feet per second velocity maximum
Process Fluid Pressure
220 Pressure Ratings
Process
Connection
Material Rating
Flanged 316L SS, A105 Carbon Steel, C276 Hastelloy 150, 300, 600 lb
Wafer 316L SS, A105 Carbon Steel, C276 Hastelloy 600 lb
221 Pressure Ratings
Probe Seal Process
Connection
Material Rating Ordering
Code
Compression
Fitting
2-inch MNPT 316L SS ANSI 600 lb CM
2-inch 150 lb flange 316L SS ANSI 150 lb CF
2-inch 300 lb flange 316L SS ANSI 300 lb CG
2-inch 600 lb flange 316L SS ANSI 600 lb CH
Packing Gland 2-inch MNPT 316L SS 50 psig PM
2-inch 150 lb flange 316L SS 50 psig PF
2-inch 300 lb flange 316L SS 50 psig PG
Packing Gland with
Removable Retractor
2-inch MNPT 316L SS ANSI 300 lb PM, RR
2-inch 150 lb flange 316L SS ANSI 150 lb PF, RR
2-inch 300 lb flange 316L SS ANSI 300 lb PG, RR
Packing Gland with
Permanent Retractor
2-inch MNPT 316L SS ANSI 600 lb PMR
2-inch 150 lb flange 316L SS ANSI 150 lb PFR
2-inch 300 lb flange 316L SS ANSI 300 lb PGR
2-inch 600 lb flange 316L SS ANSI 600 lb PHR
Process Fluid and
Ambient Temperature
Process Fluid:
Standard temperature sensor: –40° to 400° F (–40° to 205° C).
Medium temperature sensor: 250° to 500° F (120° to 260° C).
High temperature sensor: 250° to 750° F (120° to 400° C).
Ambient:
Operating: –5° to 140° F (–20° to 60° C).
Storage: –40° to 150° F (–40° to 65° C).
0-98% relative humidity, non-condensing conditions.