Sun Microsystems Sun Fire V100 - Manual (Page 102)

84 Sun Fire V100 Server User’s Guide • December 2001
FIGURE 7-2 Back-Panel Power and Fault LEDs
▼ To Turn the Fault LED On or Off
● To turn the Fault LED on, type:
● To turn the Fault LED off, type :
For information about turning the Fault LEDs on and off from the LOM shell, see
Chapter 5.
For more information about the lom commands included in the Solaris operating
environment, see Chapter 6.
# lom -F on
# lom -F off
Power LED
Fault
Ethernet 1
Ethernet 0