Sun Microsystems Sun Fire V100 - Manual (Page 110)

92 Sun Fire V100 Server User’s Guide • December 2001
FIGURE 8-6 Installing Memory Into a Socket on the System Board
5. If you are removing memory, open the latches and remove the module(s) in the
order 0, 1, 2, 3.
6. Replace the system cover and tighten the captive screw (see FIGURE 8-4 ).
Installing and Removing the Hard Disk
Drive
The server can accept two hard disk drives, which are numbered 0 and 1.
▼ To Install a Hard Disk Drive
■ If the Sun Fire V100 server is not in use, go straight to Step 1.