Sun Microsystems Sun Fire V100 - Manual (Page 76)

58 Sun Fire V100 Server User’s Guide • December 2001
▼ To Quit a LOM Named User Session
● Type:
This returns you to the LOM login prompt.
Setting the LOM Configurable Variables
Note – To be able to run the commands described in this section, the named user
must have a -level permission. For more information, see “Setting Up LOM
Privileges for Named Users” on page 54.
▼ To Turn the Fault LED On and Off
● To turn the Fault LED on by setting the faulton variable, type:
● To turn the Fault LED off by setting the faultoff variable, type:
▼ To Set an Alarm Flag
● Turn the alarm on by typing:
where n is the number of the alarm you want to turn on: 1, 2, or 3.
lom> logout
lom> faulton
lom> faultoff
lom> alarmon n