Sun Microsystems Sun Fire V100 - Manual (Page 112)

94 Sun Fire V100 Server User’s Guide • December 2001
FIGURE 8-8 Installing a Hard Disk Drive
5. Attach the power and data cables (see FIGURE 8-8 ).
6. Replace the system cover and tighten the captive screw (see FIGURE 8-4 ).
▼ To Remove a Hard Disk Drive
■ If the server is not in use, go straight to Step 1.
■ If the server is already in use, see “To Change Components In a Sun Fire V100
Server That Is In Use” on page 88.
1. Place the unit on an ESD surface and attach an antistatic wrist strap (see
FIGURE 8-2 ).
2. Remove the server’s top cover (see “To Remove the Top Cover” on page 89).
3. Disconnect the data and power cables.
Step 4a
Step 4b