Sun Microsystems Sun Fire V100 - Manual (Page 56)

38 Sun Fire V100 Server User’s Guide • December 2001
● If you are at the lom> prompt, go to the ok prompt by typing:
1. Boot the server into the Solaris environment by typing:
2. At the Solaris prompt, type:
3. When prompted to confirm that you want to create a “blank” server, type y .
4. When the server has unconfigured itself, type the LOM escape sequence. By
default, this is:
When the lom> prompt appears, follow the instructions in one of the following
sections:
■ “To Power On With the Server’s Details Registered at a Name Server” on page 34
or
■ “To Power On Without the Server’s Details Registered at a Name Server” on
page 35.
■ “To Power On a Standalone Server for the First Time” on page 37
lom> break
ok boot
# sys-unconfig
# #.