Sun Microsystems Sun Fire V100 - Manual (Page 27)

Chapter 2 Installing the Sun Fire V100 Server Into a Rack 9
A bracket is provided to aid cable management at the back of the server (see
FIGURE 2-1 ). Use zip ties to secure the cables to the cable management bracket and
hold them in place.
FIGURE 2-1 Cable Management Bracket
▼ To Assemble the Slides and Mount the Server
1. Position the two parts of the slide so that the double-angled ear (A) is in the
correct position for the rack you are installing into.
■ For the Sun StorEdge 72-inch tall (19-inch wide) rack, the double-angled ear (A)
must be to the rear (see
FIGURE 2-2 ).