Sun Microsystems Sun Fire V100 - Manual (Page 23)

Chapter 1 Introducing the Sun Fire V100 Server 5
Installation Quick Start
Task See in the Sun Fire V100 Server User’s Guide
1
Install the Hardware
Mount in the rack. “Installing the Sun Fire V100 Server Into a Rack”
on page 7
Connect the cables. “Connecting the Cables” on page 17
Set up a console connection. “Setting Up a Console Connection to the Server”
on page 20
2
Configure the Server
Note: The server is preinstalled with the Solaris 8 operating environment.
Power on the server. “Powering On and Configuring the Server” on
page 34
Manage the server from the lom
or Solaris prompt.
“Remote and Local Management” on page 41
3
Further Information
Reinstalling the Solaris software. “Reinstalling the Solaris Operating Environment”
on page 97
Troubleshooting “Diagnostic Tools” on page 100
Solaris 8 documentation http://docs.sun.com