Kyocera FS-C8008DN - Manual (Page 115)

3.10 Paper Handling
3-70
3.10.2 Setting MP Tray Paper Size
When you use the MP tray in cassette mode, you should set the MP tray size to the paper
size that is used to format the job to print. If the sizes do not match, printing will not be
performed on the correct size paper. The default setting is Letter size for the U.S. and
Canada and A4 for other countries.
For more information about the paper sizes that you can feed from the MP tray, see Chapter
2 Handling Paper .
Note
Feeding the paper having a paper size which does not match the current paper size
from the MP tray can cause paper jam.
1 11 1
Press the MENU key.
2 22 2
Press the U or V key repeatedly until Paper Handling > appears.
3 33 3
Press the Z key.
4 44 4
Press the U or V key repeatedly until >MP Tray Size appears. In this example,
the current MP tray paper size is A4.
5 55 5
To change the paper size, press the ENTER key. A blinking question mark (?)
appears.
Paper Handling >
>MP Tray Size
A4