Kyocera FS-C8008DN - Manual (Page 42)

2.4 Special Paper
2-11
2.4 Special Paper
Besides plain paper, this printer can use the following types of special paper:
You can assign one of these special paper type to a paper cassette or MP (multi-purpose)
tray by using the printer’s operator panel keys. Then, the printer can automatically select the
paper cassette or multi-purpose tray to feed the special paper from and internally adjust the
electrical parameters for optimum printing performance according to the special paper type.
For details, see
Chapter 3 Using the Operator Panel, section 3.10.4 Setting the Cassette
Paper Type on page 3-73 .
Note that some types of special paper do not allow feeding from the paper feeder cassette or
duplex (two-sided) printing.
2.4.1 Selecting the Special Paper
Since special paper differs significantly in paper composition and quality, special paper is
more likely to cause problems than white bond paper during printing. When using special
paper, be sure that they are manufactured for photocopiers and/or laser printers.
Before purchasing any special paper, make a test print using the printer and check whether
the results are satisfactory.
Note
Kyocera Mita shall not be liable for any danger to a person or machine that is caused
by using special paper (e.g., fumes emitted from the special paper).
To avoid problems, stack transparencies, labels, or envelopes on the tray or cassette face up.
Major considerations for each type of special paper are given below.
Paper type to be used Media type to be selected
Thin paper (60 to 64 g/m²) Vellum
Thick paper (90 to 200 g/m²) Thick
Colored paper Color
Recycled paper Recycle
Overhead projector transparencies Transparency
Postcards Cardstock
Envelopes Envelope
Label Labels
Table 2-5