Kyocera FS-C8008DN - Manual (Page 154)

4.3 Error Messages
4-9
Memory overflow
Press GO
The total amount of data received by the printer exceeds the printer’s inter-
nal memory. Try adding more memory. Press the GO key to resume print-
ing. You can abandon printing by the CANCEL key.
If Auto Continue is set to On, printing will be automatically resumed after a
preset period of time.
MemoryCard err##
Press GO
A memory card error has occurred. Look at the error code given in place of
##
and refer to Storage Error Codes on page 4-11 . To ignore the memory
card error, press the GO key
Missing #
toner container
Install the toner container using a toner kit for the particular color. The
printer does not operate when this message is displayed.
Missing
duplex drawer
The duplex unit is not installed. Install the duplex unit.
Missing
stapler unit
The stapler unit is not installed in the optional document finisher. Install the
stapler unit in the document finisher.
Paper jam
###############
A paper jam has occurred. The location of the paper jam is indicated in place
of the #’s. For details, see
Section 4.4 Clearing Paper Jams on page 4-12 .
Paper loading
After the paper cassette is closed, paper loading is in progress in the paper
cassette.
Print overrun
†††
Press GO
The print job transferred to the printer was too complex to print on a page.
Press the GO key to resume printing. (The page may break in some pages.).
You can abandon printing by the CANCEL key.
If Auto Continue is set to On, printing will be automatically resumed after a
preset period of time.
RAM disk error##
Press GO
A RAM disk error has occurred. Look at the error code given in place of ##
and refer to
Storage Error Codes on page 4-11 . To ignore the RAM disk
error, press the GO key.
Remove paper
Finisher tray ##
Paper remains in an option document finisher as displayed in place of ##.
Remove printed pages.
Remove paper
sorter tray ##
Paper remains in an option sorter tray as displayed in place of ##. Remove
printed pages.
Replace toner
C,M,Y,K
Toner has run out in the toner container(s). Replace the toner container using
a new toner kit for the particular color. The printer does not operate when
this message is displayed.
For example, if Replace toner C,K is displayed, replace the cyan and
the black toner containers.
Set paper
Press GO
The MP tray is out of paper. Load paper and press the GO key. (Note that
feeding the paper having a paper size which does not match the current
paper size from the MP tray can cause paper jam.)
Sorter tray ##
paper full
A tray of the optional sorter (SO-30) is full. Remove paper sheets in the cor-
responding tray as displayed in place of ##.
Sorter
paper full
The optional sorter (SO-30) tray is full. Remove paper sheets.
Message Corrective Action
Table 4-3 (Continued)