Kyocera FS-C8008DN - Manual (Page 35)

2.2 Selecting the Right Paper
2-4
2.2 Selecting the Right Paper
To get clean, crisp printouts from laser printers all the time, select high-quality printer paper
that meets the printer’s requirements. Laser printers use laser beams, electrostatic discharge,
toner, and heat, all of which affect the paper. Furthermore, paper slide, bends, and twists as
it passes through laser printers during printing. Therefore, printer paper must be able to
withstand such great stress.
This section describes the major considerations for selecting the right printing paper.
2.2.1 Guidelines
Paper conditions
Do not use paper with folded edges, curls, warps, smudges, tears, or embossing. Also do
not use paper containing lint, clay, or paper debris. Using such paper may cause illegible
printing, misfeeds, paper jams, etc., and shorten the product life of the printer. Never use
paper with surface coating or other surface treatment. The paper surface should be as
smooth and even as possible.
Paper composition
Do not use paper with surface-coating or containing plastic or carbon. The heat of fusing
causes such paper to emit toxic fumes.
Bond paper should have at least an 80 % pulp content. The percentage of cotton and other
fibers should not exceed 20 %.
Paper sizes
Table 2-3 lists the standard paper sizes and dimensions. Note that certain paper sizes are
available only for MP tray feeding (as remarked) and face-up tray delivering. For details on
using MP tray, see
Chapter 3 Using the Operator Panel, section 3.10.1 MP Tray Mode on
page 3-69 .
The dimensional tolerances for these paper sizes are
±
0.7 mm (
±
0.0276 inches) for both
length and width of paper. The corner angles must be 90
±
0.2 ° .
MP tray Size Cassette or MP tray Size
Monarch 3-7/8
× 7-1/2 inches
Ledger 11
× 17 inches
Business 4-1/8
× 9-1/2 inches
Legal 8-1/2
× 14 inches
Commercial #9 3-7/8
× 8-7/8 inches
Letter 8-1/2
× 11 inches
Commercial #6-3/4 3-5/8
× 6-1/2 inches
Executive 7-1/4
× 10-1/2 inches
ISO DL 110
× 220 mm
Folio 210
× 330 mm
ISO C5 162
× 229 mm
ISO A3 297
× 420 mm
ISO A6 105
× 148 mm
ISO A4 210
× 297 mm
JIS B6 128
× 182 mm
ISO A5 148
× 210 mm
ISO B5 176
× 250 mm
JIS B5 182
× 257 mm
A3 Wide 310
× 432 mm
JIS B4 257
× 364 mm
Table 2-3