10 duplex printing error detection setting, 10 duplex printing error detection setting -98 – Kyocera FS-C8008DN User Manual

Page 143

Advertising
background image

3.13 Other Modes

3-98

3.13.10 Duplex Printing Error Detection Setting

If the error detection setting for duplex printing has been turned On, and you attempt to print
onto a paper size and paper type that cannot be used for duplex printing, the Duplex
disabled Press GO

error message will be displayed and printing will stop. To print

onto one-side of the paper only when this message is displayed, press the GO key. The
default setting is Off.

1

11

1

Press the MENU key.

2

22

2

Press the U or V key repeatedly until Others > appears.

3

33

3

Press the Z key.

4

44

4

Press the U or V key repeatedly until >Finishing Error > appears.

5

55

5

Press the Z key and display >>Duplex.

6

66

6

Press the ENTER key. A blinking question mark (?) appears.

7

77

7

Press the U or V key to change Off to On.

8

88

8

Press the ENTER key.

9

99

9

To exit the menu selection, press the MENU key.

Others >

>Finishing >

Error

>>Duplex

Off

>>Duplex

? Off

>>Duplex

? On

Advertising