5 selecting the paper feed source, Selecting the paper feed source -74 – Kyocera FS-C8008DN User Manual
Page 119
3.10 Paper Handling
3-74
3.10.5
Selecting the Paper Feed Source
You can select the paper source using the operator panel, from which the printer feeds paper
as the default. If an optional paper feeder(s) is installed, it is also available for the default
paper source.
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Paper Handling > appears.
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >Feed Select appears.
5
55
5
To change the current paper feed source, press the ENTER key. A blinking question
mark (?) appears.
6
66
6
Press the U or V key to display the desired paper feed source. The message display
toggles through the following paper feed sources, depending on the installed optional
paper feeders (from the top most paper cassette to the bottom paper cassette):
MP tray
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassette 5
Cassette 6
Cassettes 3
and 4 are available for selection when an optional paper feeder is
installed. Cassettes 5 and 6 are available for selection when two optional
feeders are installed. The FS-C8008DN is equipped with the PD-800 duplex unit as a
standard feature, whose Casette 1 is occupied by the duplexer. Therefore,
Cassette 1
is not available for the FS-C8008DN.
7
77
7
When the desired paper source displayed, press the ENTER key.
8
88
8
To exit the menu selection, press the MENU key.
Paper Handling >
>Feed Select
Cassette 1
>Feed Select
? Cassette 1