Kyocera FS-C8008DN - Manual (Page 118)

3.10 Paper Handling
3-73
3.10.4 Setting the Cassette Paper Type
By setting a paper type (plain, recycled, etc.) to the paper cassette, you can automatically
select the paper in the paper cassette according to the paper type you command on the
printer driver. The default setting is plain paper for all paper cassettes.
For more information about paper types that you can feed from the paper cassette, see
Chapter 2 Handling Paper .
1 11 1
Press the MENU key.
2 22 2
Press the U or V key repeatedly until Paper Handling > appears.
3 33 3
Press the Z key.
4 44 4
Press the U or V key repeatedly until >Cassette # Type appears. (Where #
here refers to the cassette number.)
5 55 5
To change paper type, press the ENTER key. A blinking question mark (?) appears.
6 66 6
Press the U or V key to display the desired paper type. The message display toggles
through the following paper types:
Plain
Preprinted
Vellum
Recycled
Rough
Letterhead
Color
Prepunched
Custom 1 (to 8)
7 77 7
When the desired cassette type is displayed, press the ENTER key.
8 88 8
To exit the menu selection, press the MENU key.
Paper Handling >
>Cassette 1 Type
Plain
>Cassette 1 Type
? Plain