7 overriding difference between a4 and letter, Overriding difference between a4 and letter -77 – Kyocera FS-C8008DN User Manual
Page 122
3.10 Paper Handling
3-77
3.10.7
Overriding Difference between A4 and Letter
When the Override A4/LT is turned on using the operator panel, the printer ignores the
difference between A4 and Letter paper sizes. Printing is performed without an error
message even if the actual paper size in the current cassette differs from the paper size
formatting the job.
By default, this feature is off. To confirm and turn on the Override A4/LT, proceed as
follows:
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Paper Handling > appears.
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >Override A4/LT appears.
5
55
5
To change overriding mode, press the ENTER key. A blinking question mark (?)
appears.
6
66
6
Press the U or V key to change Off to On.
7
77
7
Press the ENTER key. The overriding mode is set.
8
88
8
To exit the menu selection, press the MENU key.
Paper Handling >
>Override A4/LT
Off
>Override A4/LT
? Off