Kyocera FS-C8008DN User Manual
Page 70
3.4 e-MPS
3-25
9
99
9
Press the ENTER key. The ID input line appears. Enter the four-digit access code
entered in the printer driver and press the ENTER key.
To enter the ID, press the Y or Z key to move the cursor to the number to be
changed and then enter the correct number by pressing the U or V key.
10
10
10
10
You can set the number of copies to be printed. To increase the copy count, press the
U key; to decrease the copy count, press the V key.
11
11
11
11
Press the ENTER key to finalize the copy count. The printer prints the specified
number of copies for the job.
Deleting a Private/Stored Job
You can individually delete stored jobs by performing the following procedure. Jobs saved
using Private Print will be automatically deleted if you turn the power off after printing, but
jobs saved using Stored Job will not be deleted automatically.
1
11
1
Follow steps 1 through 8 in the above section.
2
22
2
When the title of the job to be printed is displayed (Agenda, in this example), press
the ENTER key. Enter the four-digit access code entered in the printer driver and
press the ENTER key.
3
33
3
Press the V key repeatedly until Delete appears for the number of copies.
4
44
4
Press the ENTER key. The private job is deleted from the hard disk.
>Agenda
ID 0000
>Agenda
Copies 001
>Agenda
Copies 001
>Agenda
Delete