Kodak DCS600 - Manual (Page 153)

9-12
2 While lightly pressing the
Shutter Release button, rotate
the lens focusing ring in the
direction indicated by the focus-
to-left arrow or focus-to-right
arrow , until the arrow
disappears and the in-focus
indicator • appears.
If the focus-to-left arrow does
not disappear when you turn the
focus ring counterclockwise to
its limit, the subject is too close
for the lens to focus. Move back
from the subject.
☛
For special focusing situations
(described on page 9-13),
blinks to indicate that the
Electronic Rangefinder cannot
be used in this situation. Focus
with the clear matte field
(described on page 9-13).
3 Confirm that the in-focus
indicator • appears, then fully
depress the Shutter Release
button to capture the image.
16 16
C S L
MODE
O
O F
N F