Using the sb-28d, Using the sb-28d -10 – Kodak DCS600 User Manual

Page 182

Advertising
background image

11-10

Using the SB-28D

.

1

Turn on the camera.

2

Turn the Speedlight On by
pressing its ON/OFF button for
approximately 0.5 seconds.

The Speedlight’s Ready light
comes on as soon as the flash is
recycled and ready to fire.

If your subject is relatively far
off, wait several seconds after
the Ready light turns on before
capturing the image.

3

Aim the camera at the subject.

4

Press the Shutter Release button
to capture the image.

If the Ready lights on the
Speedlight and inside the
camera viewfinder blink for
approximately 3 seconds after
you capture the image, the
light may be insufficient for
correct exposure. If this
occurs, use a wider aperture or
move closer to the subject
before capturing any more
images.

5

Wait for a few seconds until the
Ready light comes on again
indicating that the flash is ready.
Capture a few more images,
changing exposure
compensation on the flash or on
the camera, as needed.

SEL

MODE

ZOOM

ISO

ZOOM

mm

m

18

13

9

6

4

3

1.5

1

0.6 0.8

2

FLASH

ON / OFF

A

STBY

Advertising