Cleaning the imager, Reassembling the camera, Cleaning the imager -8 – Kodak DCS600 User Manual
Page 262: Reassembling the camera -8
Advertising
16-8
Cleaning the Imager
If the imager is dirty, check the Kodak Web site for instructions on cleaning.
Reassembling the Camera
You must reassemble your camera after inspecting or cleaning the imager.
1
Select Yes in the Close Shutter
screen.
The mirrors lower and the
shutter closes.
2
Turn off the camera.
3
Carefully replace the anti-
aliasing or IR filter.
4
Replace the lens.
Advertising